View 2SK3058_359871.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
MOS FIELD EFFECT TRANSISTOR
2SK3058
SWITCHING N-CHANNEL POWER MOS FET INDUSTRIAL USE
ORDERING INFORMATION
PART NUMBER 2SK3058 2SK3058-S 2SK3058-ZJ PACKAGE TO-220AB TO-262 TO-263
DESCRIPTION
This product is N-Channel MOS Field Effect Transistor designed for high current switching applications.
FEATURES
* Super Low On-State Resistance RDS(on)1 = 17 m MAX. (VGS = 10 V, ID = 28 A) RDS(on)2 = 27 m MAX. (VGS = 4.0 V, ID = 28 A) * Low Ciss : Ciss = 2100 pF (TYP.) * Built-in Gate Protection Diode
ABSOLUTE MAXIMUM RATINGS (TA = 25 C)
Drain to Source Voltage (VGS = 0) Gate to Source Voltage (VDS = 0) Gate to Source Voltage (VDS = 0) Drain Current (DC) Drain Current (Pulse)
Note1
VDSS VGSS(AC) VGSS(DC) ID(DC) ID(pulse) PT PT Tch Tstg
60 20 +20, -10 55 165 58 1.5 150 -55 to + 150 27.5 75.6
V V V A A W W C C A mJ
Total Power Dissipation (TC = 25C) Total Power Dissipation (TA = 25C) Channel Temperature Storage Temperature Single Avalanche Current Single Avalanche Energy
Note2 Note2
IAS EAS
Notes 1. PW 10 s, Duty cycle 1 % 2. Starting Tch = 25 C, RG = 25 , VGS = 20 V 0
THERMAL RESISTANCE
Channel to Case Channel to Ambient Rth(ch-C) Rth(ch-A) 2.16 83.3 C/W C/W
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. D13097EJ1V0DS00 (1st edition) Date Published April 1999 NS CP(K) Printed in Japan
(c)
1998, 1999
2SK3058
ELECTRICAL CHARACTERISTICS (TA = 25 C)
CHARACTERISTICS Drain to Source On-state Resistance SYMBOL RDS(on)1 RDS(on)2 Gate to Source Cut-off Voltage Forward Transfer Admittance Drain Leakage Current Gate to Source Leakage Current Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Total Gate Charge Gate to Source Charge Gate to Drain Charge Body Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge VGS(off) | yfs | IDSS IGSS Ciss Coss Crss td(on) tr td(off) tf QG QGS QGD VF(S-D) trr Qrr TEST CONDITIONS VGS = 10 V, ID = 28 A VGS = 4.0 V, ID = 28 A VDS = 10 V, ID = 1 mA VDS = 10 V, ID = 28 A VDS = 60 V, VGS = 0 V VGS = 20 V, VDS = 0 V VDS = 10 V VGS = 0 V F = 1 MHz ID = 28 A VGS(on) = 10 V VDD = 30 V RG = 10 ID = 55 A VDD = 48 V VGS = 10 V IF = 55 A, VGS = 0 V IF = 55 A, VGS = 0 V di/dt = 100A/s 2100 550 220 36 410 130 260 45 7 13 1.0 60 100 1.0 13 MIN. TYP. 12 19 1.6 42 10 10 MAX. 17 27 2.0 UNIT m m V S
A A
pF pF pF ns ns ns ns nC nC nC V ns nC
TEST CIRCUIT 1 AVALANCHE CAPABILITY
D.U.T. RG = 25 PG. VGS = 20 0 V 50
TEST CIRCUIT 2 SWITCHING TIME
D.U.T.
L VDD PG. RG RG = 10
VGS RL VDD ID
90 % 90 % ID
VGS
Wave Form
0
10 %
VGS(on)
90 %
BVDSS IAS ID VDD VDS
VGS 0 = 1 s Duty Cycle 1 %
ID
Wave Form
0
10 % td(on) ton tr td(off) toff
10 % tf
Starting Tch
TEST CIRCUIT 3 GATE CHARGE
D.U.T. IG = 2 mA PG. 50
RL VDD
2
Data Sheet D13097EJ1V0DS00
2SK3058
TYPICAL CHARACTERISTICS (TA = 25 C)
DERATING FACTOR OF FORWARD BIAS SAFE OPERATING AREA
TOTAL POWER DISSIPATION vs. CASE TEMPERATURE 70
dT - Percentage of Rated Power - %
PT - Total Power Dissipation - W
20 40 60 80 100 120 140 160
100 80 60 40 20
60 50 40 30 20 10 0 20 40 60 80 100 120 140 160
0
TC - Case Temperature - C
TC - Case Temperature - C
DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE
FORWARD BIAS SAFE OPERATING AREA 1000
Pulsed 100
V)
ID(pulse) = 165A
VGS = 10 V
ID - Drain Current - A
PW 10 0
ID - Drain Current - A
100
ite d
(V
GS
=
10
=1
80 60 40 20
0
s
10
Lim n) ID(DC) = 55A (o DS R Po we r
1m
10
s
10
0m
s
VGS = 4.0 V
m
s
Di DC ss ipa
s
tio
n
1 0.1
TC = 25C Single Pulse 1
Lim
ite
d
0
1
2
3
4
10
100
VDS - Drain to Source Voltage - V
VDS - Drain to Source Voltage - V
FORWARD TRANSFER CHARACTERISTICS 100
ID - Drain Current - A
10
1
TA = 125C 75C 25C -25C
0.1 Pulsed VDS = 10 V 4 5
0
1
2
3
VGS - Gate to Source Voltage - V
Data Sheet D13097EJ1V0DS00
3
2SK3058
TRANSIENT THERMAL RESISTANCE vs. PULSE WIDTH 1 000
rth(t) - Transient Thermal Resistance - C/W
100
Rth(ch-A)= 83.3 C/W
10 Rth(ch-C)= 2.16 C/W 1
0.1
0.01 0.001 10 TC = 25C Single Pulse 100 1m 10 m 100 m 1 10 100 1000
PW - Pulse Width - s
| yfs | - Forward Transfer Admittance - S
100 Tch = -25C 25C 75C 10 125C
RDS(on) - Drain to Source On-state Resistance - m
FORWARD TRANSFER ADMITTANCE vs. DRAIN CURRENT
DRAIN TO SOURCE ON-STATE RESISTANCE vs. GATE TO SOURCE VOLTAGE 70 60 50 40 30 20 10 ID = 28 A 0 10 20 30 Pulsed
1
0.1 0.1
VDS = 10 V Pulsed 1.0 10 100
ID - Drain Current - A
VGS - Gate to Source Voltage - V
RDS(on) - Drain to Source On-state Resistance - m
DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT 80 Pulsed
GATE TO SOURCE CUT-OFF VOLTAGE vs. CHANNEL TEMPERATURE
VGS(off) - Gate to Source Cut-off Voltage - V
2.0
VDS = 10 V ID = 1 mA
60
1.5
40
1.0
20
VGS = 4.0 V VGS = 10 V
0.5
0 0.1
0
1
10
100
-50
0
50
100
150
ID - Drain Current - A
Tch - Channel Temperature - C
4
Data Sheet D13097EJ1V0DS00
2SK3058
RDS(on) - Drain to Source On-state Resistance - m
DRAIN TO SOURCE ON-STATE RESISTANCE vs. CHANNEL TEMPERATURE 40 VGS = 4.0 V 30 100
SOURCE TO DRAIN DIODE FORWARD VOLTAGE
ISD - Diode Forward Current - A
VGS = 10 V 10
20 VGS = 10 V 10 ID = 28 A -50 0 50 100 150
1 VGS = 0 V 0.1 0 0.5 1 Pulsed 1.5
0
Tch - Channel Temperature - C
VSD - Source to Drain Voltage - V
CAPACITANCE vs. DRAIN TO SOURCE VOLTAGE 100 000
SWITCHING CHARACTERISTICS
Ciss, Coss, Crss - Capacitance - pF
td(on), tr, td(off), tf - Switching Time - ns
VGS = 0 V f = 1 MHz
10 000
VDD = 30 V VGS = 10 V RG = 10
10 000
1 000
tr tf td(off) td(on)
Ciss 1 000 Coss 100 0.1 Crss 1 10 100
100
10 0.1 1 10 100
VDS - Drain to Source Voltage - V
ID - Drain Current - A
REVERSE RECOVERY TIME vs. DRAIN CURRENT 1 000
VDS - Drain to Source Voltage - V
60 VDD = 12 V 30 V 48 V 40
12 10 8 6
100
10
20
4 2
1 0.1
1
10
100
0
20
40
60
80
0
IF - Drain Current - A
QG - Gate Charge - nC
Data Sheet D13097EJ1V0DS00
5
VGS - Gate to Source Voltage - V
trr - Reverse Recovery Time - ns
di/dt = 100 A /s VGS = 0 V
DYNAMIC INPUT/OUTPUT CHARACTERISTICS 80 16 ID = 55 A 14
2SK3058
SINGLE AVALANCHE ENERGY vs. INDUCTIVE LOAD 100 160
SINGLE AVALANCHE ENERGY DERATING FACTOR
VDD = 30V RG = 25 VGS = 20 V 0 V IAS 27.5A
IAS - Single Avalanche Energy - mJ
EAS
10
Energy Derating Factor - %
10 m
IAS = 27.5 A
140
=7
5.6
120 100 80 60 40 20
mJ
1.0 VDD = 30 V VGS = 20 V 0 V RGS = 25 100 1m
0.1 10
0 25
50
75
100
125
150
L - Inductive Load - H
Starting Tch - Starting Channel Temperature - C
6
Data Sheet D13097EJ1V0DS00
2SK3058
PACKAGE DRAWINGS (Unit : mm)
1)TO-220AB (MP-25)
3.00.3 10.6 MAX. 10.0 5.9 MIN. 15.5 MAX. 4.8 MAX.
2)TO-262 (MP-25 Fin Cut)
1.00.5
3.60.2
4.8 MAX. 1.30.2
1.30.2
(10) 4
1
2
3
4 123 6.0 MAX.
1.30.2
1.30.2
12.7 MIN.
12.7 MIN.
8.50.2
0.750.3 2.54 TYP.
0.50.2 2.54 TYP. 1.Gate 2.Drain 3.Source 4.Fin (Drain)
2.80.2
0.750.1 2.54 TYP.
0.50.2 2.54 TYP. 1.Gate 2.Drain 3.Source 4.Fin (Drain)
2.80.2
3)TO-263 (MP-25ZJ)
(10) 4 1.00.5 8.50.2 4.8 MAX. 1.30.2
EQUIVALENT CIRCUIT
Drain
5.70.4
1.40.2 0.70.2 2.54 TYP. 1 2
(0
.5
R)
Gate
.8R )
0.50.2
Body Diode
3 2.54 TYP.
(0
Remark
The diode connected between the gate and source of the transistor serves as a protector against ESD. When this device actually used, an additional protection circuit is externally required if a voltage exceeding the rated voltage may be applied to this device.
2.80.2
1.Gate 2.Drain 3.Source 4.Fin (Drain)
Gate Protection Diode
Source
Data Sheet D13097EJ1V0DS00
7
2SK3058
* The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. * NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. * Descriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information. * While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. * NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance.
M7 98. 8

▲Up To Search▲

Price & Availability of 2SK3058

	To Download 2SK3058 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .